Molecular Distillation (Glass)

Molecular Distillation (Glass)

$34,999.00Price

Introduction:

Molecular distillation is a special liquid-liquid separation technology. It is different from traditional distillation by the principle of boiling point difference separation, but by the difference of the average free path of the molecular motion of different substances to achieve separation. When the liquid mixture flows along with the heating plate and is heated, light and heavy molecules will escape the liquid surface and enter the gas phase. Due to the different free paths of light and heavy molecules, the molecules of different substances will move at different distances after they escape from the liquid surface. After passing through the condensation tube in the main evaporator, light molecules reach the condensation tube and are discharged, while heavy molecules cannot reach the condensation tube and are discharged along with the mixed liquid. In this way, the purpose of material separation is achieved.

SKU: 3
  • Parameters:

    Type WDMD-60 WDMD-80 WDMD-100 WDMD-150 WDMD-200 WDMD-230
    Barrel Diameter(mm) 60 80 100 150 200 230
    Feeding rate (g/hr) 250-500 500-750 750-1500 1500-3000 3500-5000 3500-5000
    Feeding tank capacity(L) 1 1.5 2 2 5 5
    Evaporation area(m²) 0.06 0.1 0.15 0.24 0.35 0.5
    Motor(W) 90 120 120 120 200 200
    Max speed(RPM) 450 450 450 450 300 300
    Distillate receiving flask(L) 1L 1L 2L 3L 5L 5L
    Residue receiving flask 1L 1L 2L 3L 5L 5L
    Crude oil processing capacity(KG/Hr) 0.1-2 0.3-4 2-4 3-5 5-6 8-10
    Voltage(V) 220 220 220 220 220 220
    Operating temperature range -90℃- 200℃ -90℃- 200℃ -90℃- 200℃ -90℃- 200℃ -90℃- 200℃

    -90- 200

  • Extraction purity:

    Can reach 95%

  • Work process:

    The material is transported from the feed tank to the jacketed main evaporator. The main evaporator is continuously heated. The built-in scraper scrapes the material evenly into a stream of liquid film and evaporates instantly. The low-boiling substances begin to gasify and adsorb Above the built-in condensation coil, it flows into the light component receiving bottle along the outer wall of the condensation tube, and the high boiling point material flows into the heavy component receiving bottle along the inner wall of the main evaporator.

  • Shipping info:

    The price is factory price, not include freight. Please tell us your address if you need reference freight.  Click here and send us an email.